Skip to Content
  1. All Products
  2. All Products
  3. NavStrobe Anti-Collision Green Strobe Light 45W 1350 Leds
Select currency EUR
NavStrobe Anti-Collision Green Strobe Light 45W 1350 Leds

NavStrobe Anti-Collision Green Strobe Light 45W 1350 Leds

https://www.roctexo.com/web/image/product.template/93166/image_1920?unique=6d47631
Part numbers : RX1-11-12985 , AC-GS-45W , 11-12985
Unit of Measure: EA

61.70 EUR / EA 61.7 EUR 61.70 € excl. VAT

61.70 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 3 EA ready to ship on Monday 2026-08-31
Order before 17:00 CET Tomorrow
Up to 9 EA ready to ship on Thursday 2026-09-03
Order before 17:00 CET Tomorrow
4 EA available on request, fees apply
Special order from vendor stock.

The NavStrobe AC-GS-45W is a compact green LED anti-collision strobe light for 10–15 VDC electrical systems. It uses nine 5 W CREE LED emitters and is specified at 45 W with a stated luminous flux of 1,350 lm.

  • Manufacturer part number: AC-GS-45W
  • Green anti-collision strobe light
  • LED emitters: 9 × 5 W CREE LEDs
  • Power: 45 W
  • Rated voltage: 10–15 VDC
  • Strobe mode: fast strobe, stated 100 ms
  • Connection: 30 cm twin leads
  • Not EASA/FAA approved

Suitable where a green LED anti-collision strobe light with the above electrical characteristics is required. Confirm installation requirements, electrical protection and applicability against the aircraft or project documentation before fitment.

Contact Us

Terms and Conditions

Share

Overview

Aircraft Anti-Collision Strobe Light, 45w, 1350 LM CREE LEDs

  • Emitter Type: LED
  • Total Emitters: 9 x 5w
  • Power: 45W Equivalent
  • Rated Voltage: 10-15VDC
  • Draws <280ma @ 14.2VDC
  • Luminous Flux: 1350 LM/108cdl
  • 1 mode: fast strobe (100ms)
  • Base Type: 12"/30cm twin leads
  • Application: Aircraft Anti-Collision Strobe Light
  • Non-PMA'd
  • Contains 1 light bulb per pack
Dimensions: 2.7 in x 1.2 in (60 mm x 30 mm)
Weight: 0.28 oz (8 g)

Installation: 1- Clean surfaces with alcohol. 2- Apply adhesive tape 3- Let stand for 24 hours.



These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.