Skip to Content

NavStrobe Anti-Collision Green Strobe Light 45W 1350 Leds

https://www.roctexo.com/web/image/product.template/93166/image_1920?unique=99a391e
Part numbers : RX1-11-12985 , AC-GS-45W , 11-12985
Unit of Measure: EA

62.32 EUR / EA 62.32 EUR 62.32 € excl. VAT

62.32 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 8 EA ready to ship on Thursday 2026-08-20
Order before 16:00 CET on Tuesday 2026-08-18
5 EA available on request, fees apply
Special order from vendor stock.

The NavStrobe AC-GS-45W is a compact green LED anti-collision strobe light for 10–15 VDC electrical systems. It uses nine 5 W CREE LED emitters and is specified at 45 W with a stated luminous flux of 1,350 lm.

  • Manufacturer part number: AC-GS-45W
  • Green anti-collision strobe light
  • LED emitters: 9 × 5 W CREE LEDs
  • Power: 45 W
  • Rated voltage: 10–15 VDC
  • Strobe mode: fast strobe, stated 100 ms
  • Connection: 30 cm twin leads
  • Not EASA/FAA approved

Suitable where a green LED anti-collision strobe light with the above electrical characteristics is required. Confirm installation requirements, electrical protection and applicability against the aircraft or project documentation before fitment.

Overview

Aircraft Anti-Collision Strobe Light, 45w, 1350 LM CREE LEDs

  • Emitter Type: LED
  • Total Emitters: 9 x 5w
  • Power: 45W Equivalent
  • Rated Voltage: 10-15VDC
  • Draws <280ma @ 14.2VDC
  • Luminous Flux: 1350 LM/108cdl
  • 1 mode: fast strobe (100ms)
  • Base Type: 12"/30cm twin leads
  • Application: Aircraft Anti-Collision Strobe Light
  • Non-PMA'd
  • Contains 1 light bulb per pack
Dimensions: 2.7 in x 1.2 in (60 mm x 30 mm)
Weight: 0.28 oz (8 g)

Installation: 1- Clean surfaces with alcohol. 2- Apply adhesive tape 3- Let stand for 24 hours.



These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.