Skip to Content
  1. All Products
  2. All Products
  3. NavStrobe Anti-Collision Strobe Light 45W1350 Lm Cree Leds
Select currency EUR
NavStrobe Anti-Collision Strobe Light 45W1350 Lm Cree Leds

NavStrobe Anti-Collision Strobe Light 45W1350 Lm Cree Leds

https://www.roctexo.com/web/image/product.template/96608/image_1920?unique=99a391e
Part numbers : RX1-11-12424 , AC-WS-45W , 11-12424
Unit of Measure: EA

85.21 EUR / EA 85.21 EUR 85.21 € excl. VAT

85.21 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
2 EA ready to ship Today
Order before 15:30 CET Today
Up to 10 EA ready to ship on Thursday 2026-08-20
Order before 15:30 CET Today
14 EA available on request, fees apply
Special order from vendor stock.

NavStrobe AC-WS-45W is a compact LED anti-collision strobe light for applications requiring a high-visibility flashing light. The unit is specified with nine 5 W CREE LED emitters, a stated luminous flux of 1,350 lm, and a fast-strobe operating mode.

  • Manufacturer part number: AC-WS-45W
  • LED configuration: 9 × 5 W CREE LED emitters
  • Power rating: 45 W
  • Rated operating voltage: 10–15 V DC
  • Stated luminous flux: 1,350 lm
  • Strobe mode: fast strobe, stated as 100 ms
  • Connection: 30 cm twin leads
  • Supplied as one light per pack
  • Listed by the source as non-PMA’d

Please verify suitability, installation method and applicable airworthiness requirements for the intended aircraft or project before installation.

Contact Us

Terms and Conditions

Share

Overview

Aircraft Anti-Collision Strobe Light, 45w, 1350 LM CREE LEDs

  • Emitter Type: LED
  • Total Emitters: 9 x 5w
  • Power: 45W Equivalent
  • Rated Voltage: 10-15VDC
  • Draws <280ma @ 14.2VDC
  • Luminous Flux: 1350 LM/108cdl
  • 1 mode: fast strobe (100ms)
  • Base Type: 12"/30cm twin leads
  • Application: Aircraft Anti-Collision Strobe Light
  • Non-PMA'd
  • Contains 1 light bulb per pack
Dimensions: 2.7 in x 1.2 in (60 mm x 30 mm)
Weight: 0.28 oz (8 g)

Installation: 1- Clean surfaces with alcohol. 2- Apply adhesive tape 3- Let stand for 24 hours.



These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.