Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

Trig TY 91 COMMWith 2 Place 4Foot Harness Jacks Attached

https://www.roctexo.com/web/image/product.template/126564/image_1920?unique=20c5c46
Part numbers : RX1-11-12073 , ASA-00271-SU , 11-12073
Unit of Measure: EA

2282.71 EUR / EA 2282.71 EUR 2,282.71 € excl. VAT

2282.71 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 1 EA ready to ship on Thursday 2026-10-08
Order before 16:00 CET on Tuesday 2026-10-06

The Trig TY91 is a compact, certified VHF communication radio designed to minimise panel-space requirements while providing 8.33 kHz and 25 kHz channel spacing. This configuration is supplied with a two-place harness of approximately 1.2 m (4 ft) and attached headset jacks, as identified for manufacturer part number ASA-00271-SU.

The TY91 uses a separate control head and radio unit, supporting flexible installation where available panel depth is limited. Its 6 W nominal transmitter output, Dual Watch function and Push Step frequency selection provide practical communication capability for suitably approved aircraft installations.

  • 8.33 kHz and 25 kHz channel spacing
  • Dual Watch monitoring of two frequencies
  • Push Step frequency-selection function
  • Built-in two-place intercom and external-speaker amplifier
  • 11–33 V DC supply range
  • Nominal transmitter power: 6 W
  • Control-head installation depth: 74 mm with connector fitted
  • ETSO-2C169a and ETSO-2C128 certification; TSO-C169a and TSO-C128a certification

Manufacturer part number: ASA-00271-SU.

Installation and operation should be carried out in accordance with the applicable Trig documentation and aircraft approval requirements.

Documentation: Trig TY91 installation and operating manuals.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.