Skip to Content
  1. All Products
  2. All Products
  3. ESD-1 Static Wick Non Certified
Select currency EUR
ESD-1 Static Wick Non Certified

ESD-1 Static Wick Non Certified

https://www.roctexo.com/web/image/product.template/85414/image_1920?unique=a025711
Part numbers : RX1-11-10574 , ESD-1 , 11-10574
Unit of Measure: EA

31.26 EUR / EA 31.26 EUR 31.26 € excl. VAT

31.26 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
102 EA available on request, fees apply
Special order from vendor stock.

The ESD-1 is a non-certified static wick intended for use in static-discharge installations. It is supplied as an individual unit and is identified by manufacturer part number ESD-1.

  • Manufacturer part number: ESD-1
  • Non-certified version; not EASA/FAA approved
  • Approximate overall length including mounting base: 194 mm
  • Approximate discharger-element length: 121 mm
  • Approximate mounting-hole spacing: 28 mm

Please verify the required part number, installation arrangement and applicable airworthiness requirements before purchase and installation.

Contact Us

Terms and Conditions

Share

Overview

Physical Characteristics: Fully Qualified to MIL-D-9129D

ESD-1 Static Wick

  • Length: (including mounting base) 7.65 inches. (discharger element) 4.75 inches
  • Distance between mounting holes: 1.1"
  • Weight: Less than 4.5 grams
  • Airspeed: To 150 knots
  • Altitude: To 20,000 feet msl
  • Temperature: +85°C to -55°C, MIL-STD0202C, Method 102A, Condition D
  • Tension: 50 pound pull longitudinal from plastic end to metal shank
  • Solvents: No physical changes after one hour immersion in aviation gasoline, jet fuel or hydraulic fluids
  • Equivalent to Cessna P/N C592001-0201

Note: This is Non-Certified Version.



These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.