Skip to Content
  1. All Products
  2. All Products
  3. Coax Cable Rg 400 M17/128-RG400
Select currency EUR
Coax Cable Rg 400 M17/128-RG400

Coax Cable Rg 400 M17/128-RG400

https://www.roctexo.com/web/image/product.template/20402/image_1920?unique=9608c7b
Part numbers : RX1-11-09202 , J2662M , 11-09202
Unit of Measure: FT

7.07 EUR / FT 7.07 EUR 7.07 € excl. VAT

7.07 EUR / FT excl. VAT

Not Available For Sale

This combination does not exist.

Availability
137 FT ready to ship on Monday 2026-08-10
Order before 15:30 CET on Monday 2026-08-10
Up to 9,283 FT ready to ship on Thursday 2026-08-13
Order before 15:30 CET on Monday 2026-08-10
Up to 16,169 FT ready to ship on Monday 2026-08-17
Order before 15:30 CET on Monday 2026-08-10
18,864 FT available on request, fees apply
Special order from vendor stock.

RG-400 coaxial cable identified as M17/128-RG400 and manufacturer part number J2662M. Supplied by the foot for aircraft electrical and RF cable installations where the specified cable type is required.

  • MIL-DTL-17 coaxial cable designation
  • Nominal impedance: 50 ±2 ohm
  • Centre conductor: 19-strand silver-plated copper, approximately 0.98 mm overall conductor diameter
  • Double silver-plated copper shield
  • FEP jacket
  • Dielectric diameter: approximately 2.95 mm
  • Maximum capacitance: 29.4 pF/ft
  • Maximum voltage: 1,900 V
  • Maximum frequency: 12.4 GHz

Please verify the required cable designation, installation data and connector suitability against the applicable approved maintenance data before use.

Contact Us

Terms and Conditions

Share

Overview

Specifications:
  • MIL-DTL-17 Coaxial Cable
  • Center Conductor: .0384 (19/.008) SPC
  • Dielectric Diameter: .116
  • Imp. ohms: 50 +/-2
  • Shield: SPC (2)
  • Capacitance(pF/ft): 29.4
  • Max Voltage: 1900
  • MaxFrequency(GHz): 12.4
  • Jacket: FEP

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.