Skip to Content

Sumitomo Soldering Sleeve L-C-2 .125

https://www.roctexo.com/web/image/product.template/85368/image_1920?unique=7e7cc79
Part numbers : RX1-11-07902 , 189-10282 , 11-07902
Unit of Measure: EA

0.61 EUR / EA 0.61 EUR 0.61 € excl. VAT

0.61 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
60 EA ready to ship on Monday 2026-08-31
Order before 15:30 CET on Monday 2026-08-31
Up to 1,734 EA ready to ship on Thursday 2026-09-03
Order before 15:30 CET on Monday 2026-08-31
Up to 4,890 EA ready to ship on Monday 2026-09-07
Order before 15:30 CET on Monday 2026-08-31
25,738 EA available on request, fees apply
Special order from vendor stock.

Sumitomo soldering sleeve, nominal .125 (3.2 mm) size, for heat-applied shield termination work.

The transparent polyvinylidene fluoride (PVDF) heat-shrink sleeve incorporates a pre-fluxed solder preform and two thermoplastic sealing inserts. During installation, heat melts the solder to connect the ground lead and cable shield, while the sleeve shrinks and the sealing inserts melt to help create an environmentally protected termination.

  • Manufacturer part number: 189-10282
  • Nominal size: .125 (3.2 mm)
  • Transparent PVDF heat-shrink outer sleeve
  • Integrated pre-fluxed solder preform
  • Two thermoplastic sealing inserts
  • Supplied as an individual piece

Overview

Soldering Sleeve .125.

Termination sleeves consist of a heat-shrinkable, transparent, polyvinylidene fluoride sleeve with an inner, pre-fluxed, solder preform and two thermoplastic sealing inserts. When heat is applied, the solder melts and flows to provide a superior connection between the ground lead and the shield. At the same time, the two thermoplastic sealing inserts melt and the outer sleeve shrinks to provide an environmentally protected termination. Otherwise, they are essentially the same.



These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.