Skip to Content
  1. All Products
  2. All Products
  3. TE P&B Circuit Breaker W31-X2M1G-5
Select currency EUR
TE P&B Circuit Breaker W31-X2M1G-5

TE P&B Circuit Breaker W31-X2M1G-5

https://www.roctexo.com/web/image/product.template/20375/image_1920?unique=9225385
Part numbers : RX1-11-03936 , W31-X2M1G-5 , 11-03936
Unit of Measure: EA

47.17 EUR / EA 47.17 EUR 47.17 € excl. VAT

47.17 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
3 EA ready to ship on Monday 2026-08-10
Order before 15:30 CET on Monday 2026-08-10
Up to 86 EA ready to ship on Thursday 2026-08-13
Order before 15:30 CET on Monday 2026-08-10
Up to 158 EA ready to ship on Monday 2026-08-17
Order before 15:30 CET on Monday 2026-08-10
255 EA available on request, fees apply
Special order from vendor stock.

The TE Connectivity Potter & Brumfield W31-X2M1G-5 is a single-pole thermal circuit breaker from the W23/W31 series. This series-trip configuration is rated at 5 A and features a silver actuator.

  • Manufacturer part number: W31-X2M1G-5
  • TE Connectivity internal number: 4-1393247-2
  • Circuit breaker type: thermal
  • Circuit function: series trip
  • Rated current: 5 A
  • Poles: 1
  • Operating voltage: 240 VAC / 50 VDC
  • Trip time at 200% rated current: 6–22 seconds
  • Illumination: none

Suitable where a replacement is required by the exact manufacturer part number and electrical configuration. Verify the applicable installation data and system requirements before use.

Manufacturer documentation: TE Connectivity product page for W31-X2M1G-5.

Contact Us

Terms and Conditions

Share

P & B Part No.AMP
Rating		BeechCessnaPiperPart No.
W31X2M1G55---11-03936

Overview

These bi-metallic single pole breakers weigh less than 2 oz. and are especially suitable for homebuilt aircraft. Used as original equipment in Beech, Cessna and Piper aircraft. Maximum operating voltages: 32 VDC and 250 VAC (to 400 Hz).

Toggle Thermal Circuit Breaker
• 0.5 amp to 50 amp ratings may be used as on/off switch.
• Cannot be reset against overload.
• Screw termination.
• Trip-free operation.



These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.