Skip to Content
  1. All Products
  2. All Products
  3. TE P&B Circuit Breaker W23-X1A1G-10
Select currency EUR
TE P&B Circuit Breaker W23-X1A1G-10

TE P&B Circuit Breaker W23-X1A1G-10

https://www.roctexo.com/web/image/product.template/26967/image_1920?unique=9225385
Part numbers : RX1-11-03924 , W23-X1A1G-10 , 11-03924
Unit of Measure: EA

39.77 EUR / EA 39.77 EUR 39.77 € excl. VAT

39.77 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
3 EA ready to ship on Monday 2026-08-10
Order before 15:30 CET on Monday 2026-08-10
Up to 46 EA ready to ship on Thursday 2026-08-13
Order before 15:30 CET on Monday 2026-08-10
Up to 67 EA ready to ship on Monday 2026-08-17
Order before 15:30 CET on Monday 2026-08-10
72 EA available on request, fees apply
Special order from vendor stock.

The TE Connectivity / Potter & Brumfield W23-X1A1G-10 is a single-pole thermal circuit breaker from the W23/W31 series. It combines a push-pull actuator with series-trip operation for circuit-protection installations where the specified electrical and mechanical characteristics are required.

  • Manufacturer part number: W23-X1A1G-10
  • Current rating: 10 A
  • Operating voltage: up to 240 VAC or 50 VDC
  • Circuit breaker type: thermal, series trip
  • Configuration: 1 pole
  • Actuator: black, non-illuminated push-pull button
  • Trip time at 200% load: 6–22 seconds
  • Termination: 8-32 screw terminals arranged at 90°
  • Panel cut-out diameter: approximately 9.5–9.8 mm
  • Mounting bushing: threaded, approximately 9.5 mm long

TE Connectivity identifies this configuration as part of its Potter & Brumfield W23-31 circuit-breaker range. Refer to the manufacturer’s W23/W31 series datasheet and product documentation when confirming suitability for a particular electrical system or installation.

Contact Us

Terms and Conditions

Share

P & B Part No.AMP
Rating		BeechCessnaPiperPart No.
W23X1A1G1010CB-2310A-45465711-03924

Overview

These bi-metallic single pole breakers weigh less than 2 oz. and are especially suitable for homebuilt aircraft. Used as original equipment in Beech, Cessna and Piper aircraft. Maximum operating voltages: 32 VDC and 250 VAC (to 400 Hz).

Push/Pull Actuator Thermal Circuit Breaker
    0.5 amp to 50 amp ratings may be used as on/off switch
    Cannot be reset against overload
    W23 has visible trip indicator
    Screw termination
    Trip-free operation



These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.