Skip to Content
  1. All Products
  2. All Products
  3. King Ky 196B COMM28V 8.33 Khz
Select currency EUR
King Ky 196B COMM28V 8.33 Khz

Image for illustration only. It may show a product series rather than the exact product offered.

King Ky 196B COMM28V 8.33 Khz

https://www.roctexo.com/web/image/product.template/80902/image_1920?unique=1b86a09
Part numbers : RX1-11-03417 , 064-01084-0101 , 11-03417
Unit of Measure: EA

6317.38 EUR / EA 6317.38 EUR 6,317.38 € excl. VAT

6317.38 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The BendixKing KY 196B is a 28 VDC, panel-mount VHF COM transceiver with 8.33 kHz channel spacing. Identified by manufacturer part number 064-01084-0101, it is intended for communication-radio installations requiring the KY 196B configuration.

The unit uses a digital frequency synthesiser and provides separate active and standby frequency displays, allowing a standby frequency to be selected and transferred when required. Non-volatile memory retains programmed frequencies without external battery support.

  • Manufacturer: BendixKing
  • Manufacturer part number: 064-01084-0101
  • Model: KY 196B
  • Supply configuration: 28 VDC
  • Channel spacing: 8.33 kHz
  • Frequency range: 118.0000 to 136.9916 MHz
  • Frequency memories: nine pilot-programmable channels, plus active and standby frequency storage
  • Minimum transmit output: 16 W
  • Approximate dimensions: 34 mm high × 160 mm wide × 274 mm deep

Please confirm the exact part number, installation requirements, interface configuration and applicable approved data before purchase and installation. Refer to current BendixKing documentation for installation, operating and continuing-airworthiness information.

Contact Us

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.