Skip to Content
  1. All Products
  2. All Products
  3. JPI EDM CHT Gasket Probe Sensor 18MM TSO M-113
Select currency EUR

Image for illustration only. It may show a product series rather than the exact product offered.

JPI EDM CHT Gasket Probe Sensor 18MM TSO M-113

https://www.roctexo.com/web/image/product.template/26899/image_1920?unique=e4d0c0f
Part numbers : RX1-10-27093 , M-113 , 10-27093
Unit of Measure: EA

106.17 EUR / EA 106.17 EUR 106.17 € excl. VAT

106.17 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 16 EA ready to ship on Monday 2026-09-28
Order before 17:00 CET Tomorrow
Up to 50 EA ready to ship on Thursday 2026-10-01
Order before 17:00 CET Tomorrow
17 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The J.P. Instruments M-113 is an 18 mm cylinder head temperature (CHT) gasket probe for JPI EDM engine-monitoring installations. This Type K thermocouple probe uses a gasket/washer format and is installed in place of the standard copper spark-plug gasket.

  • Manufacturer: J.P. Instruments
  • Manufacturer part number: M-113
  • Probe type: CHT gasket (washer) probe
  • Thermocouple type: Type K
  • Nominal spark-plug gasket size: 18 mm
  • FAA TSO-C43 / AS8005 identified
  • Unit of measure: each

The probe may be installed at either the upper or lower spark plug, subject to the applicable installation documentation and the configuration of the monitored engine. As with gasket-style CHT probes, readings at the spark-plug location can differ from readings obtained with other CHT probe styles. Verify the required probe type, spark-plug gasket size and instrument configuration before purchase and installation.

Contact Us

Terms and Conditions

Share

Overview

JPI CHT Probe Gaskets 14mm/18mm. FAA TSO-C43/AS8005.

The Cylinder Head Temperature (CHT) - Gasket Type (Washer) - probe, replaces the standard copper sparkplug gasket on the sparkplug. You may install the probe on the upper or lower spark plug (the one that provides the best correlation with the other temperature probe). Due to the sparkplug location, the gasket probe may read 25'F higher (generally the sparkplug is the hottest part of the cylinder, which will cause this discrepancy).

Specifications

  • 1 Thermocouple Type K CHT Gasket Probe



These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.