Skip to Content

Dynon Skyview SV-ADSB-472 ADS-B In Dual Channel Receiver

https://www.roctexo.com/web/image/product.template/106669/image_1920?unique=b79f530
Part numbers : RX1-10-06419 , 102985-000 , 10-06419
Unit of Measure: EA

930.89 EUR / EA 930.89 EUR 930.89 € excl. VAT

930.89 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 5 EA ready to ship on Monday 2026-08-17
Order before 17:00 CET on Friday 2026-08-14
Up to 11 EA ready to ship on Thursday 2026-08-20
Order before 17:00 CET on Friday 2026-08-14
1 EA available on request, fees apply
Special order from vendor stock.

The Dynon SkyView SV-ADSB-472 is a remote-mounted dual-band ADS-B receiver for integration with a Dynon SkyView installation. It receives ADS-B traffic on both 978 MHz UAT and 1090 MHz frequencies, providing dual-band traffic reception within the SkyView system.

The unit uses an externally mounted, dedicated ADS-B antenna. The antenna must not be shared with the transponder antenna and should be installed with at least 0.6 m separation from the transponder antenna, in accordance with Dynon guidance.

  • Manufacturer: Dynon Avionics
  • Manufacturer part number: 102985-000
  • Model: SV-ADSB-472
  • Dual-band ADS-B reception: 978 MHz UAT and 1090 MHz
  • Remote-mounted configuration
  • Power requirement: 0.05 A at 12 V DC
  • Approximate outside dimensions: 102 × 71 × 25 mm
  • Component weight: approximately 0.12 kg

Dynon identifies certain graphical weather and associated traffic services as US-specific. Availability and suitability of ADS-B services should therefore be confirmed for the intended operating area and aircraft installation.

For installation planning, refer to the current Dynon SkyView documentation and the SV-ADSB-472 dimensional drawing.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.