Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

UMA Ceramic Press Sender 70 PSI Gauge TSO .5-4.5V

Factory-direct distributor Roctexo Aerospace is a factory-direct distributor for UMA, the manufacturer of this product. We welcome requests for any quantity of this product, as well as for other products manufactured by UMA.
https://www.roctexo.com/web/image/product.template/20296/image_1920?unique=a73d2bf
Part numbers : RX1-10-05342 , T3EUMA070G-A20 , 10-05342
Unit of Measure: EA

155.39 EUR / EA 155.39 EUR 155.39 € excl. VAT

155.39 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The UMA Instruments T3EUMA070G-A20 is a conditioned ceramic gauge-pressure sender for a 0–70 psi measurement range with a 0.5–4.5 V output signal. The “A” configuration has a 1/8-27 MNPT pressure connection.

  • Manufacturer part number: T3EUMA070G-A20
  • Pressure type: gauge pressure
  • Pressure range: 0–70 psi
  • Output: 0.5–4.5 V
  • Supply voltage: 9–12 V DC
  • Maximum current draw: 40 mA
  • Accuracy: ±2.5% full-scale repeatability
  • Operating temperature: -40 °C to +120 °C
  • Housing: aluminium
  • Manufacturer-listed media compatibility: air, oil, avgas, jet fuel and water
  • Manufacturer specification identifies this pressure-sender series as TSO’d to C45b and C47.

Installation note: UMA specifies that the sender is to be powered by a regulated indicating instrument, not connected directly to the aircraft electrical bus. Confirm electrical integration, installation details and suitability against the current manufacturer documentation and applicable approved maintenance data.

Documentation: UMA pressure sender specification sheet and UMA ceramic pressure sender installation instructions.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.