Skip to Content
  1. All Products
  2. All Products
  3. UMA 3-1/8 Altimeter 0-20K Foot With Mb 2 Rev Dial
Select currency EUR
UMA 3-1/8 Altimeter 0-20K Foot With Mb 2 Rev Dial

Image for illustration only. It may show a product series rather than the exact product offered.

UMA 3-1/8 Altimeter 0-20K Foot With Mb 2 Rev Dial

Factory-direct distributor Roctexo Aerospace is a factory-direct distributor for UMA, the manufacturer of this product. We welcome requests for any quantity of this product, as well as for other products manufactured by UMA.
https://www.roctexo.com/web/image/product.template/54220/image_1920?unique=a73d2bf
Part numbers : RX1-10-05126 , 5-300-42 , 10-05126
Unit of Measure: EA

233.93 EUR / EA 233.93 EUR 233.93 € excl. VAT

233.93 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 2 EA ready to ship on Thursday 2026-10-01
Order before 16:00 CET on Tuesday 2026-09-29
2 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The UMA Instruments 5-300-42 is a compact, analogue altimeter with a nominal 3-1/8 in (approximately 79 mm) instrument format. It features a 0–20,000 ft altitude range, a two-revolution dial and a millibar barometric scale.

The barometric setting is adjustable by knob and displayed through a Kollsman window. This instrument is supplied as a non-TSO product and is not EASA/FAA approved.

  • Manufacturer: UMA Instruments
  • Manufacturer part number: 5-300-42
  • Instrument size: 3-1/8 in (approximately 79 mm)
  • Altitude range: 0–20,000 ft
  • Barometric scale: millibar
  • Dial: two-revolution
  • Barometric setting: knob adjustable, with Kollsman window
  • Status: non-TSO; not EASA/FAA approved

For general operating information, see the UMA altimeter operating instructions.

Contact Us

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.