Skip to Content
  1. All Products
  2. All Products
  3. Aerospace Logic Ungrounded EGT 2 Clamp Type Probe A200-TeC20
Select currency EUR
Aerospace Logic Ungrounded EGT 2 Clamp Type Probe A200-TeC20

Image for illustration only. It may show a product series rather than the exact product offered.

Aerospace Logic Ungrounded EGT 2 Clamp Type Probe A200-TeC20

https://www.roctexo.com/web/image/product.template/58264/image_1920?unique=182fd28
Part numbers : RX1-10-04812 , A200-TEC20 , 10-04812
Unit of Measure: EA

252.16 EUR / EA 252.16 EUR 252.16 € excl. VAT

252.16 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The Aerospace Logic A200-TEC20 is an ungrounded, fast-response Type-K exhaust gas temperature (EGT) thermocouple probe kit. It is designed for clamp installation on exhaust pipes with an outside diameter of 38–51 mm.

The probe uses an Inconel 600 sheath and a high-purity magnesium oxide insulation shield. It is designed and tested for continuous operation above 2200°F. The supplied probe has a 90° insertion bend, which may be reformed during installation as required.

  • Manufacturer part number: A200-TEC20
  • Ungrounded Type-K EGT thermocouple
  • Clamp fitment: 38–51 mm exhaust outside diameter
  • 1.22 m twisted, shielded thermocouple lead with male shielded connector
  • Supplied with a 51 mm aircraft-grade 316 stainless-steel ring clamp
  • For use with Aerospace Logic exhaust gas instruments

Refer to the manufacturer’s installation instructions for installation requirements and wiring routing guidance: A200-TEC Clamp EGT Thermocouple Installation Instructions.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.