Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

Airtech Rotax Gear Box Clutch Assembled RK400C

https://www.roctexo.com/web/image/product.template/13606/image_1920?unique=182fd28
Part numbers : RX1-10-04811 , RK400 , 10-04811
Unit of Measure: EA

735.79 EUR / EA 735.7900403768506 EUR 735.79 € excl. VAT

735.79 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
2 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The Air-Tech RK400C is an assembled centrifugal gearbox clutch, identified by manufacturer part number RK400. It is intended for use with the Rotax C gearbox.

The clutch disengages the propeller from the engine during starting and idle operation. According to the available product information, the propeller remains stationary below approximately 2,350 RPM, supporting reduced vibration at idle.

  • Assembled centrifugal clutch
  • Manufacturer part number: RK400
  • Roctexo part number: RX1-10-04811
  • For Rotax C gearbox installations
  • Installation replaces the gearbox flywheel and hardy disc

Please consult the applicable installation instructions and approved maintenance data before installation.

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Overview

The primary purpose of the clutch is to disengage the prop from the engine allowing it to start and operate at idle without vibration. When the engine is idling (below 2350 RPM) the prop is not turning.

Installation of the clutch replaces the gear box flywheel and the hardy disk.

Added weight is approx. 3 Lbs. At this time the clutch is only available in the "C" gearbox.



These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.