Skip to Content
  1. All Products
  2. All Products
  3. Aerospace Logic Oil Temperature Sensor A200-TSO
Select currency EUR
Aerospace Logic Oil Temperature Sensor A200-TSO

Image for illustration only. It may show a product series rather than the exact product offered.

Aerospace Logic Oil Temperature Sensor A200-TSO

https://www.roctexo.com/web/image/product.template/26835/image_1920?unique=38bd475
Part numbers : RX1-10-04801 , A200-TSO , 10-04801
Unit of Measure: EA

311.33 EUR / EA 311.33 EUR 311.33 € excl. VAT

311.33 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 2 EA ready to ship on Thursday 2026-10-01
Order before 16:00 CET on Tuesday 2026-09-29
4 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The Aerospace Logic A200-TSO is a monolithic oil temperature sensor with integrated on-chip signal conditioning. It is intended for oil-temperature measurement within a qualified Aerospace Logic 200 Series instrument system.

  • Manufacturer part number: A200-TSO
  • Operating temperature range: -50°C to +150°C
  • Stated accuracy: ±0.5°C across the operating range
  • Ratiometric analogue output: 0.25 V at -50°C to 4.75 V at +150°C with a 5 V supply
  • Power requirement when used with a 200 Series instrument: 5 V / 1 mA
  • 5/8-18 threaded sensor body with copper crush washer
  • Supplied with an approximately 1.2 m colour-coded cable

When installed in accordance with approved instructions and as part of a qualified instrument system, the sensor is stated to be STC'd as a primary replacement. Confirm installation, system configuration and applicable approval requirements with the relevant approved data before use.

Contact Us

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.