Skip to Content
  1. All Products
  2. All Products
  3. JPI EDM Fuel Pressure Inject Sensor 1/8NPT 5-32PSI TSO 3060-17
Select currency EUR
JPI EDM Fuel Pressure Inject Sensor 1/8NPT 5-32PSI TSO 3060-17

Image for illustration only. It may show a product series rather than the exact product offered.

JPI EDM Fuel Pressure Inject Sensor 1/8NPT 5-32PSI TSO 3060-17

https://www.roctexo.com/web/image/product.template/80775/image_1920?unique=d759669
Part numbers : RX1-10-03922 , 3060-17 , 10-03922
Unit of Measure: EA

276.96 EUR / EA 276.96 EUR 276.96 € excl. VAT

276.96 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 2 EA ready to ship on Thursday 2026-10-15
Order before 16:00 CET on Tuesday 2026-10-13
Up to 5 EA ready to ship on Monday 2026-10-19
Order before 16:00 CET on Tuesday 2026-10-13
3 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The J.P. Instruments 3060-17 is a fuel-pressure sensor for injected-engine monitoring applications. It features a 1/8 NPT connection and a 5–32 psi fuel-pressure range.

  • Manufacturer: J.P. Instruments
  • Manufacturer part number: 3060-17
  • Fuel-pressure range: 5–32 psi
  • Connection: 1/8 NPT
  • Sensor type: two-wire resistive transducer; no polarity
  • Unit of measure: each

J.P. Instruments installation documentation specifies mounting the sensor to the pressure line using a flexible hose and suitable fittings, with the sensor supported on the engine mount structure or firewall. Direct mounting to the engine is not recommended. Select and install all associated hose, fittings, clamps and electrical connections in accordance with the applicable J.P. Instruments documentation and the aircraft’s approved maintenance data.

Manufacturer documentation: J.P. Instruments EDM-900/930 Installation Manual

Contact Us

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.