Skip to Content
  1. All Products
  2. All Products
  3. Fuel Probe 12/24V 6 In 0-5V
Select currency EUR
Fuel Probe 12/24V 6 In 0-5V

Fuel Probe 12/24V 6 In 0-5V

https://www.roctexo.com/web/image/product.template/54190/image_1920?unique=8899609
Part numbers : RX1-10-03753 , FP1206V , 10-03753
Unit of Measure: EA

127.74 EUR / EA 127.74 EUR 127.74 € excl. VAT

127.74 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 17 EA ready to ship on Monday 2026-08-31
Order before 17:00 CET on Friday 2026-08-28
4 EA available on request, fees apply
Special order from vendor stock.

Fuel Probe FP1206V is a 12/24 V capacitive fuel-level probe with a 0–5 V output and a nominal 152 mm (6 in) probe length.

The probe uses concentric tubes separated by insulators to form a capacitive sensing element. As fuel level changes around the probe, the capacitance changes; the integral amplifier converts this change into an output signal for a compatible meter or display device.

  • Manufacturer part number: FP1206V
  • Supply voltage: 12/24 V
  • Output: 0–5 V
  • Nominal probe length: 152 mm (6 in)
  • Manually calibratable
  • Unit of measure: each

Suitable for use where a 0–5 V capacitive fuel-level sensing solution is required. Confirm physical installation, electrical interface, calibration procedure and applicable airworthiness requirements before installation.

Contact Us

Terms and Conditions

Share

Overview

The probe is constructed of concentric tubing (a small tube inside a larger tube). The tubes, which are separated by small insulators to keep the tubes from touching, acts as a capacitor that has one value in air (empty tank) and changes in value as the fuel level rises inside the probe. The amplifier converts these values to a signal suitable to drive a standard meter or other display device. Can be manually calibrated. See Documents tab.
12-24 Volts
6,12, or 24 inches



These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.