Skip to Content
  1. All Products
  2. All Products
  3. Reddish Stall Warner Mark 2
Select currency EUR

Image for illustration only. It may show a product series rather than the exact product offered.

Reddish Stall Warner Mark 2

https://www.roctexo.com/web/image/product.template/8846/image_1920?unique=482c1be
Part numbers : RX1-10-02686 , MARK 2 , 10-02686
Unit of Measure: EA

116.18 EUR / EA 116.18 EUR 116.18 € excl. VAT

116.18 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The Reddish Stall Warner Mark 2 is a stall warning unit intended for experimental aircraft installations. It incorporates a ground-adjustable vane and a microswitch.

Compared with the Mark 1 version, the Mark 2 features a longer vane while using the same installation arrangement.

  • Manufacturer part number: MARK 2
  • Includes vane and microswitch
  • Ground-adjustable vane
  • Approximate unit weight: 0.18 kg
  • For experimental aircraft only; not EASA/FAA approved

Confirm suitability, installation requirements and applicable airworthiness requirements with qualified maintenance personnel before installation.

Contact Us

Terms and Conditions

Share

Overview

Developed in the UK by Nigel Reddish, these stall warners have been installed in many RV series aircraft. the vane is ground adjustable and installation is simple. Includes a micro switch and vane. For experimental aircraft only.

Note: The Mark 2 Version is practically the same as the Mark 1, the only difference is the vane on the Mark 2 is longer. The installation is the same as the Mark 1. Mark 1 Mark 2



These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.