Skip to Content
  1. All Products
  2. All Products
  3. UMA Temperature Probe 12MM X 1.5 Pitch 1B7 Non-TSO
Select currency EUR
UMA Temperature Probe 12MM X 1.5 Pitch 1B7 Non-TSO

Image for illustration only. It may show a product series rather than the exact product offered.

UMA Temperature Probe 12MM X 1.5 Pitch 1B7 Non-TSO

Factory-direct distributor Roctexo Aerospace is a factory-direct distributor for UMA, the manufacturer of this product. We welcome requests for any quantity of this product, as well as for other products manufactured by UMA.
https://www.roctexo.com/web/image/product.template/40383/image_1920?unique=a73d2bf
Part numbers : RX1-10-02376 , 1B7 , 10-02376
Unit of Measure: EA

92.55 EUR / EA 92.55 EUR 92.55 € excl. VAT

92.55 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The UMA Instruments 1B7 is a non-TSO temperature probe for resistance-input temperature indication systems. It uses a 5 kΩ thermistor sensing element and has an M12 x 1.5 threaded mounting configuration.

The probe features a stepped sensing tip with an approximate 13 mm tip length and is supplied with 152 mm lead wires. Its metric thread format supports identification and replacement against the manufacturer part number.

  • Manufacturer: UMA Instruments
  • Manufacturer part number: 1B7
  • Sensor type: 5 kΩ thermistor
  • Thread: M12 x 1.5
  • Approximate tip length: 13 mm
  • Lead length: 152 mm minimum
  • Status: Non-TSO
  • Unit of measure: Each

For installation, connect only to an indicating instrument designed for resistance input and follow the current UMA 1B-series installation instructions. Verify the required installation configuration and applicable airworthiness basis before fitment.

Contact Us

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.