Skip to Content
  1. All Products
  2. All Products
  3. UMA 3-1/8 Altimeter 0-5500 Foot With Baro In Hg
Select currency EUR
UMA 3-1/8 Altimeter 0-5500 Foot With Baro In Hg

Image for illustration only. It may show a product series rather than the exact product offered.

UMA 3-1/8 Altimeter 0-5500 Foot With Baro In Hg

Factory-direct distributor Roctexo Aerospace is a factory-direct distributor for UMA, the manufacturer of this product. We welcome requests for any quantity of this product, as well as for other products manufactured by UMA.
https://www.roctexo.com/web/image/product.template/58227/image_1920?unique=a73d2bf
Part numbers : RX1-10-02369 , 5-300-30 , 10-02369
Unit of Measure: EA

208.51 EUR / EA 208.51 EUR 208.51 € excl. VAT

208.51 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
2 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The UMA Instruments 5-300-30 is a 3-1/8 in (approximately 79 mm) mechanical altimeter with a 0–5,500 ft indication range. It features a single-pointer, non-sensitive display and an adjustable Kollsman window calibrated in inches of mercury (inHg) for barometric setting.

This UMA altimeter has a non-sealed case. Consult the manufacturer’s installation instructions before installation; UMA states that the 3-1/8 in model must not be connected to an aircraft static line, as its non-sealed case can result in a static-system leak.

  • Manufacturer: UMA Instruments
  • Manufacturer part number: 5-300-30
  • Nominal instrument size: 3-1/8 in (approximately 79 mm)
  • Altitude range: 0–5,500 ft
  • Barometric-setting window: inHg
  • Design: single-pointer, non-sensitive, non-sealed case
  • Approval status: not EASA/FAA approved

For installation guidance, refer to the UMA Altimeter Installation Instructions.

Contact Us

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.