Skip to Content
  1. All Products
  2. All Products
  3. MS28034-3 Engine Temperature Sensor
Select currency EUR
MS28034-3 Engine Temperature Sensor

MS28034-3 Engine Temperature Sensor

https://www.roctexo.com/web/image/product.template/126243/image_1920?unique=9efed8c
Part numbers : RX1-10-01668 , MS28034-3 , 10-01668
Unit of Measure: EA

1679.20 EUR / EA 1679.2 EUR 1,679.20 € excl. VAT

1679.20 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 4 EA ready to ship on Thursday 2026-08-20
Order before 16:00 CET Today
Up to 7 EA ready to ship on Monday 2026-08-24
Order before 16:00 CET Today
51 EA available on request, fees apply
Special order from vendor stock.

The MS28034-3 is a thread-mounted, two-wire engine temperature sensor for temperature-measurement installations where this exact part number is specified by the applicable maintenance or equipment documentation.

It features a single sensing element, hermetically sealed tip-welded construction, integral connector and low stem conduction design. The housing and connector shell are stainless steel, with a FAS-TIP sensing element.

  • Manufacturer part number: MS28034-3
  • Two-wire element with integral connector
  • Thread-mounted, corrosion-resistant construction
  • Typical response time: 1.3 seconds (63.2% of step)
  • Operating temperature range: -70 °C to +300 °C
  • Operating pressure: 200 psi (approximately 13.8 bar); burst pressure: greater than 600 psi (approximately 41 bar)
  • Insulation resistance: 1,000 MΩ at 100 VDC
  • Resistance-versus-temperature data referenced to MIL-T-7990B, Table I
  • Typical weight: 68 g

Please verify the required part number, electrical characteristics, mounting interface and applicable approved technical data before installation.

Contact Us

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.