Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

VDO Oil Pressure Sender 1/8 NPT 80 PSI Non-TSO

https://www.roctexo.com/web/image/product.template/76511/image_1920?unique=54f7370
Part numbers : RX1-10-01568 , 360-003 , 10-01568
Unit of Measure: EA

59.64 EUR / EA 59.64 EUR 59.64 € excl. VAT

59.64 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
3 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

VDO pressure sender, manufacturer part number 360-003, with an 80 psi (5.5 bar) maximum sender value and 1/8-27 NPTF threaded connection.

This analogue, resistance-type sender provides a 10–180 Ω output and uses standard earth grounding. It has a knurled-nut electrical connection and no high- or low-pressure warning contact.

  • Manufacturer part number: 360-003
  • Maximum sender value: 80 psi (5.5 bar)
  • Output: analogue, 10–180 Ω
  • Thread: 1/8-27 NPTF
  • Ground: standard earth ground
  • Electrical connection: knurled nut
  • Operating voltage: 6–24 V
  • Warning contact: none

Important: Non-TSO. Source information states that this VDO pressure sender is not suitable for aircraft use. Verify the requirements and approved data applicable to the installation before use.

Manufacturer documentation: VDO Temperature and Pressure Senders installation instructions (A2C59519516).

Overview

VDO Oil Pressure Sender: Ohmic Range: 10-180

Warning Notice:
VDO pressure senders are not to be used with any type of fuel application.
VDO pressure senders may not be used in automotive braking systems.
VDO pressure senders are not suitable for use in aircraft.

Specifications

  • Manufacturer: VDO
  • Type: Pressure Sender
  • Range: 80 psi / 5 bar
  • Ohmic Range: 10-180
  • Thread: 1/8-27 NPT



These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.