Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

Westach Fuel Sender AP-Q24B3-D1205V

Factory-direct distributor Roctexo Aerospace is a factory-direct distributor for Westach, the manufacturer of this product. We welcome requests for any quantity of this product, as well as for other products manufactured by Westach.
https://www.roctexo.com/web/image/product.template/126234/image_1920?unique=4a80f6c
Part numbers : RX1-10-01262 , AP-Q24B3-D120-5V , AP-Q24B3-D1205V , 10-01262
Unit of Measure: EA

209.45 EUR / EA 209.45 EUR 209.45 € excl. VAT

209.45 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
1 EA ready to ship Today
Order before 15:30 CET Today
Up to 2 EA ready to ship on Thursday 2026-10-15
Order before 15:30 CET Today

The Westach AP-Q24B3-D120-5V is a capacitance fuel level sender designed to provide a 0–5 VDC fuel-level signal. It features a 610 mm probe length with a 76 mm bendable section located between the black mark and the mounting flange.

  • Manufacturer part number: AP-Q24B3-D120-5V
  • Alternate manufacturer part number: AP-Q24B3-D1205V
  • Capacitance fuel level sender
  • Probe length: 610 mm
  • Bendable section: 76 mm
  • Probe outside diameter: 6.4 mm
  • Supply input: 12 or 24 VDC; maximum 28 VDC
  • Output: 0–5 VDC
  • Three-wire configuration
  • Nominal supply range: 11–28 VDC
  • Current draw: less than 30 mA
  • Manufacturer identifies a typical SAE mounting flange
  • Listed weight: 0.345 kg

Suitable where the required fuel-level indication system is designed for a 0–5 VDC sender output. Confirm physical installation, electrical configuration, calibration requirements, and suitability for the specific aircraft or system before installation.

Manufacturer documentation: Westach capacitance fuel sender instructions.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.