Skip to Content

Reddish Stall Warner Mark 1

https://www.roctexo.com/web/image/product.template/3156/image_1920?unique=5b5c002
Part numbers : RX1-10-00189 , 10-00189
Unit of Measure: EA

109.00 EUR / EA 109.0 EUR 109.00 € excl. VAT

109.00 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
1 EA ready to ship Tomorrow
Order before 15:30 CET Tomorrow
Up to 24 EA ready to ship on Thursday 2026-08-27
Order before 15:30 CET Tomorrow
2 EA available on request, fees apply
Special order from vendor stock.

The Reddish Stall Warner Mark 1 is a stall-warning component developed in the UK by Nigel Reddish for experimental aircraft applications.

It includes a ground-adjustable vane and microswitch. The Mark 1 configuration is distinct from the Mark 2 by vane length; installation is stated to be the same for both versions.

  • Roctexo part number: RX1-10-00189
  • Supplied with adjustable vane and microswitch
  • Intended for experimental aircraft applications
  • Mark 1 installation manual documentation is available

Please confirm suitability, installation method and applicable airworthiness requirements with appropriately qualified personnel before installation.

Overview

Developed in the UK by Nigel Reddish, these stall warners have been installed in many RV series aircraft. the vane is ground adjustable and installation is simple. Includes a micro switch and vane. For experimental aircraft only.

Note: The Mark 2 Version is practically the same as the Mark 1, the only difference is the vane on the Mark 2 is longer. The installation is the same as the Mark 1. Mark 1 Mark 2

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.