Skip to Content
  1. All Products
  2. All Products
  3. Uniwrap Silicone Tape Red
Select currency EUR

Uniwrap Silicone Tape Red

https://www.roctexo.com/web/image/product.template/100642/image_1920?unique=308eb41
Part numbers : RX1-09-30450 , LW201R10-P1 , 09-30450
Unit of Measure: EA

15.63 EUR / EA 15.63 EUR 15.63 € excl. VAT

15.63 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 598 EA ready to ship on Thursday 2026-08-20
Order before 16:00 CET on Tuesday 2026-08-18
Up to 897 EA ready to ship on Monday 2026-08-24
Order before 16:00 CET on Tuesday 2026-08-18
348 EA available on request, fees apply
Special order from vendor stock.

UniWrap red silicone rubber sealing tape is a self-fusing, non-adhesive tape designed to form a permanent bond to itself when wrapped under tension. It can be used where protective wrapping, joining or electrical insulation is required.

Unlike conventional adhesive tapes, the silicone material fuses into a homogeneous mass and is stated to remain unaffected by moisture, cold, heat, ozone, shock and vibration after fusing.

  • Manufacturer part number: LW201R10-P1
  • Colour: red
  • Supplied as a 9.1 m roll
  • Nominal width: 25.4 mm
  • Nominal thickness: approximately 0.5 mm
  • Self-fusing silicone rubber construction; non-tacky, adhesive-free surface
  • Source states compliance with MIL-I-46852 Type II

Suitable for maintenance and workshop applications requiring a compact silicone sealing and insulating wrap. Supplied as one each.

Contact Us

Terms and Conditions

Share

Overview

UniWrap silicone rubber sealing tape bonds to itself permanently to protect, repair, join, or insulate virtually any type of part on which ordinary tape can be used. But the big difference between UniWrap and ordinary tape is that it fuses to itself permanently to form a homogenous mass and provides unprecedented protection and insulating characteristics. UniWrap uses no adhesives so it is non-tacky.It has a 12 month shelf life and after fusing is unaffected by moisture, cold, heat, ozone shock, or vibration. Meets MIL-I-46852 Type II as well as strict aerospace industry performance requirements. Furnished in 10 yard rolls, UniWrap is 1" wide and 0.020" thick.

Specifications

  • Thickness (in.): 0.018-0.022
  • Width (in.): 0.9375-1.0625
  • Dielectric Strength (volts/mil): 400 min.
  • Tensile Strength (psi): 700 min.
  • Elongation (%): 300 min.
  • Bond Strength (lbs.in.): 2.0 min
  • Volume Resistivity: 1x10^13 min.
  • Water Absorption (%): 3 max.



These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.