Skip to Content
  1. All Products
  2. All Products
  3. Eko Fill E620 Gl
Select currency EUR
Eko Fill E620 Gl

Eko Fill E620 Gl

https://www.roctexo.com/web/image/product.template/40183/image_1920?unique=d1f0562
Part numbers : RX1-09-06800 , E620-G , 09-06800
Unit of Measure: EA

300.16 EUR / EA 300.16 EUR 300.16 € excl. VAT

300.16 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 2 EA ready to ship on Monday 2026-08-17
Order before 17:00 CET on Friday 2026-08-14
Up to 28 EA ready to ship on Thursday 2026-08-20
Order before 17:00 CET on Friday 2026-08-14
12 EA available on request, fees apply
Special order from vendor stock.

Stewart Systems EkoFill E620-G is a waterborne fabric sealer, filler and UV protectant for aircraft fabric-finishing work. Supplied in a 1 US gallon container (approximately 3.8 L), it is designed to seal the fabric weave, help fill minor surface imperfections and provide a prepared surface for subsequent topcoat application.

  • Manufacturer part number: E620-G
  • Roctexo part number: RX1-09-06800
  • Container size: 1 US gal (approximately 3.8 L)
  • Manufacturer-listed use on polyester fabric, glass cloth, gelcoat and composite materials
  • Waterborne formulation; manufacturer describes EkoFill as low odour, low VOC, non-flammable and suitable for water clean-up

Use in accordance with the applicable Stewart Systems instructions and the approved maintenance or finishing data for the aircraft or component. Review the current Safety Data Sheet before use; appropriate ventilation and personal protective equipment are required, particularly where spraying or sanding may create airborne material.

Documentation: EkoFill Instructions and Safety Data Sheet.

Contact Us

Terms and Conditions

Share

Overview

With Heat Pack option adds a shipping heat pack to keep the material from freezing while in transit. It is recommended for winter months / destinations in cold climates where the temperature may drop below freezing while in transit. If the material freezes, it is not recommended for use.

Part of the Stewart Aircraft Covering System, Stewart Systems EkoFill seals the fabric, provides UV protection, fills the weave and acts as a primer for application of EkoPoly. On fabric airplanes, all covering, rib stitching and tapes are complete and the fabric has been cleaned with EkoClean before applying EkoFill. EkoFill is used on Dacron/polyester fabric, glass cloth, gel coat and composite materials. It has excellent adhesion, superior high build properties and is an outstanding UV barrier on fabric and composite surfaces. EkoFill dry sands very easily with open coat sand paper. EkoFill is non-flammable, has little odor and is water cleanup.

Attention
Cold weather warning for shipping: It is possible for product to freeze based on weather conditions.



These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.