Skip to Content
  1. All Products
  2. All Products
  3. Prist Hi-Flash Hi-Flo 5Gl
Select currency EUR
Prist Hi-Flash Hi-Flo 5Gl

Image for illustration only. It may show a product series rather than the exact product offered.

Prist Hi-Flash Hi-Flo 5Gl

https://www.roctexo.com/web/image/product.template/125973/image_1920?unique=d923358
Part numbers : RX1-09-04436 , 16056160 , 09-04436
Unit of Measure: EA

281.17 EUR / EA 281.17 EUR 281.17 € excl. VAT

281.17 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 2 EA ready to ship on Monday 2026-10-05
Order before 17:00 CET on Friday 2026-10-02
Up to 37 EA ready to ship on Thursday 2026-10-08
Order before 17:00 CET on Friday 2026-10-02
8 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

PRIST Hi-Flash Hi-Flo™ is an anti-icing aviation fuel additive supplied in a 5 US gal (approximately 18.9 L) pail. It is formulated to depress the freezing point of water in aviation fuel, helping to control ice-crystal formation within the fuel system.

The Hi-Flo formulation is intended for higher-flow refuelling operations. PRIST states a recommended treatment concentration of 0.10% to 0.15% by volume; at this range, a 5 US gal pail is sufficient to treat approximately 3,785 to 5,678 L of fuel.

  • Product: PRIST Hi-Flash Hi-Flo™ anti-icing aviation fuel additive
  • Manufacturer part number: 16056160
  • Pack size: 5 US gal / approximately 18.9 L pail
  • Hi-Flo formulation for refuelling flow rates stated by the manufacturer as 40–55 US gal/min (approximately 150–208 L/min)
  • Specified by PRIST as conforming to MIL-DTL-85470 and ASTM D4171 for use in civilian jet fuels as a fuel-system icing inhibitor

Use only in accordance with the aircraft, engine and fuel-system manufacturer’s instructions. Review the current product documentation and safety data sheet before handling and use.

Contact Us

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.