Skip to Content

CH92133 Champion Exciter

https://www.roctexo.com/web/image/product.template/132589/image_1920?unique=f4d5819
Part numbers : RX1-08-19064 , CH92133 , 08-19064
Unit of Measure: EA

3806.69 EUR / EA 3806.69 EUR 3,806.69 € excl. VAT

3806.69 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The Champion Aerospace CH92133 is a solid-state turbine ignition exciter assembly. It is FAA-PMA approved for Rolls-Royce Model 250 Series I, II, III and IV engine applications as a replacement for specified exciter part numbers. Applicability and installation must be confirmed against the applicable approved engine and aircraft maintenance data.

Designed with solid-state circuitry, the CH92133 provides a radiation-free exciter solution without radioactive materials. Its form, footprint and weight are stated by Champion to match the relevant OEM unit, supporting replacement installation where approved.

  • Manufacturer part number: CH92133
  • Input power: 14–30 VDC; 1.1 A typical, 1.5 A maximum
  • Output voltage: 7 kV minimum; 8 kV typical
  • Spark rate: 5–15 sparks per second, dependent on input voltage
  • Stored energy: 1.4 J nominal
  • Operating temperature range: −54 °C to +121 °C
  • Continuous-duty operation rated at +85 °C
  • Unipolar output waveform with 40 μs spark duration

FAA-PMA replacement references: Rolls-Royce 6899093 and 6895573; Unison 10-614950-1, 10-387150-1 and 49522.

Champion states that the CH92133 has been tested for vibration, shock, high- and low-temperature performance, continuous operation at an equivalent altitude of 7,925 m, and electromagnetic compatibility in accordance with RTCA/DO-160E test criteria.

Documentation: Champion Aerospace M250 CH92133 Exciter Data Sheet

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.