Skip to Content
  1. All Products
  2. All Products
  3. Surefly TacH2 Tachometer Signal Converter
Select currency EUR
Surefly TacH2 Tachometer Signal Converter

Surefly TacH2 Tachometer Signal Converter

https://www.roctexo.com/web/image/product.template/125890/image_1920?unique=e6697a5
Part numbers : RX1-08-17284 , TACH2 , 08-17284
Unit of Measure: EA

253.31 EUR / EA 253.31 EUR 253.31 € excl. VAT

253.31 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 4 EA ready to ship on Monday 2026-08-17
Order before 17:00 CET Tomorrow
16 EA available on request, fees apply
Special order from vendor stock.

The SureFly TACH2 Tachometer Signal Converter conditions tachometer signals from one or two SureFly SIM P-Leads for connection to supported electronic tachometer inputs.

  • Converts SIM P-Lead signals to a negative-going output for Horizon P-1000 digital tachometer inputs.
  • Provides a positive-going 0–5 V square-wave output for electronic tachometers designed to use a magnetic-pickup tachometer signal.
  • Accepts one or two SureFly SIM P-Lead inputs and provides corresponding conditioned outputs.
  • Aircraft-bus power input range: 8.5–30 VDC.
  • Maximum power consumption: less than 0.25 A.
  • Designed for installation inside the aircraft cabin and secure attachment to the airframe with screws and nuts.

Manufacturer part number: TACH2.

Installation, wiring configuration and tachometer suitability should be verified against the applicable aircraft data and the SureFly technical documentation.

Contact Us

Terms and Conditions

Share

Overview

The Tach Signal Converter (Tach2) converts SIM P-Lead signals to negative –going signals compatible with the Horizon P-1000 digital tachometer input and to a positive-going 0-5V square wave signal compatible with electronic tachometers that rely on a signal from a magnetic pickup inserted into a magneto.

Tach 2 can accept one or two SIM P-Leads as input, converts and conditions the signals and outputs them to corresponding output terminals. The Tach2 must be installed in the aircraft cabin and secured to the airframe with screws and nuts. The Tach2 power input from the aircraft bus may range from 8.5VDC to + 30VDC without damage. The Tach2 consumes less than 0.25A of power. 0.2 lbs.



These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.