Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

Thermo-Tec 11042 2X50 Carbon Fiber Exhaust Wrap

https://www.roctexo.com/web/image/product.template/80217/image_1920?unique=3b9550d
Part numbers : RX1-08-13903 , 11042 , 08-13903
Unit of Measure: EA

66.94 EUR / EA 66.94 EUR 66.94 € excl. VAT

66.94 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
3 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

Thermo-Tec 11042 Carbon Fiber Exhaust Wrap is a basalt-based exhaust insulating wrap with a carbon-fibre appearance. Supplied as a 50.8 mm wide × 15.2 m long roll, it is intended for wrapping exhaust components where a flexible, high-temperature insulation material is required.

  • Manufacturer part number: 11042
  • Roll size: 50.8 mm × 15.2 m
  • Material: basalt (pulverised lava rock)
  • Carbon-fibre appearance with resistance to discolouration
  • Manufacturer-stated continuous-contact temperature capability: up to 649 °C
  • Not EASA/FAA approved

Confirm suitability, installation method and continuing-airworthiness requirements against the applicable aircraft and engine technical data before use.

Documentation: Manufacturer specification sheet.

DescriptionSpecificationsPN
Carbon Fiber Exhaust Wrap2" X 50ft08-13903

Overview

Hi-Tech Carbon Fiber appearance and Titanium like strength, Carbon Fiber Exhaust Insulating Wrap is produced utilizing pulverized Lava rock called basalt. It is extremely pliable, resistant to discoloration and can withstand 2000 degrees Fahrenheit in direct continuous contact.

Wrapping headers and exhaust maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust scavenging is produced, along with lower intake temperatures.



These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.