Skip to Content
  1. All Products
  2. All Products
  3. Phillips 66 Oil Victory Aviation 100AW SAE 50 - Case Of 12 Quarts
Select currency EUR
Phillips 66 Oil Victory Aviation 100AW SAE 50 - Case Of 12 Quarts

Phillips 66 Oil Victory Aviation 100AW SAE 50 - Case Of 12 Quarts

https://www.roctexo.com/web/image/product.template/8247/image_1920?unique=73457a9
Part numbers : RX1-08-13850 , 1059152 , 08-13850
Unit of Measure: EA

98.72 EUR / EA 98.72 EUR 98.72 € excl. VAT

98.72 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Also available as 1 QT
Availability
1 EA available on request, fees apply
Special order from vendor stock.

Phillips 66® Victory® Aviation Oil 100AW is an SAE 50, single-grade ashless-dispersant engine oil for aircraft piston engines. It is pre-blended with the LW-16702 antiscuff/antiwear additive specified in Lycoming Service Bulletins 446E and 471B and Service Instruction 1409C.

The ashless-dispersant formulation is designed to help minimise sludge, varnish, piston and combustion-chamber deposits. Phillips 66 also specifies high film strength for wear and piston-scuffing protection, along with rust- and corrosion-protection characteristics.

  • Product: Phillips 66 Victory Aviation Oil 100AW
  • SAE grade: 50
  • Oil type: single-grade, ashless dispersant
  • Antiwear additive: pre-blended LW-16702
  • Manufacturer part number: 1059152
  • Pack size: case of 12 quarts

Phillips 66 lists this oil for opposed and radial piston aircraft engines, particularly where cam-lifter wear is a concern. Confirm the correct oil grade and applicable maintenance data for the specific engine before use.

Manufacturer-listed technical requirements include Avco Lycoming Material Specification 301G, Pratt & Whitney Service Bulletin 1183 Rev. U, SAE J1899 and Teledyne Continental Material Specification MHS-24B.

Documentation: Phillips 66 Victory Aviation Oil 100AW product information and data sheet.

Contact Us
Documents

Terms and Conditions

Share

Overview

Phillips 66® Victory Aviation Oil 100AW is an ashless dispersant, single-grade engine oil pre-blended with the proper concentration of antiscuff/antiwear additive (LW-16702) as mandated by Lycoming Service Bulletins 446E and 471B and Service Instruction 1409C. It is recommended for use in opposed piston and radial piston aircraft engines where cam lifter wear is a concern.

The ashless dispersant formulation helps minimize the formation of engine sludge, varnish, piston deposits and combustion chamber deposits, resulting in a much cleaner engine compared with the use of straight (nondispersant) mineral oils. This oil has a high viscosity index and low pour point compared with many other single-grade aircraft engine oils, allowing its use over a wide temperature range.

Victory Aviation Oil 100AW is FAA approved as an alternate method of compliance to AD80-04-03 R2, paragraph b.1.

Features

  • Ashless dispersant helps minimize engine sludge and varnish deposits for a cleaner engine
  • Pre-blended with Lycoming-approved antiwear additive
  • High film strength for protection against wear and piston scuffing
  • High viscosity index and low pour point for use over a wide temperature range
  • Protects against rust and corrosion
  • Formulated with the same high-quality base oils as used in Phillips 66 X/C® Aviation Oil

Specifications

  • Avco Lycoming Material Specification No. 301G
  • Pratt & Whitney Service Bulletin No. 1183 Rev. U
  • SAE Standard J1899
  • Teledyne Continental Material Specification MHS-24B
  • U.S. Military Specification MIL-L-22851D (obsolete) for additive treatment

Applications

  • Opposed piston aircraft engines, especially where cam lifter wear is a concern



These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.