Skip to Content
  1. All Products
  2. All Products
  3. Reiff Preheat 912/914 250W 220V
Select currency EUR
Reiff Preheat 912/914 250W 220V

Reiff Preheat 912/914 250W 220V

https://www.roctexo.com/web/image/product.template/100203/image_1920?unique=7d91582
Part numbers : RX1-08-07620-1 , R912-250W , 08-07620-1
Unit of Measure: EA

637.59 EUR / EA 637.59 EUR 637.59 € excl. VAT

637.59 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The Reiff Preheat R912-250W is a 250 W electric engine-preheat system identified for Rotax 912 and 914 series engines. This product is specified as a 220 V version.

The 250 W configuration uses two 100 W HotStrip heating elements for bonding to the crankcase and a 50 W HotBand heater for installation around the oil tank. A thermostat is bonded to the oil tank to limit oil temperature to approximately 88 °C.

  • Manufacturer part number: R912-250W
  • Roctexo part number: RX1-08-07620-1
  • Nominal power: 250 W
  • Specified supply voltage: 220 V
  • For Rotax 912 and 914 series engines

Installation requires correct surface preparation, bonding of the HotStrip elements, and secure fitting of the oil-tank band heater. Refer to the manufacturer’s Rotax 912/914 installation instructions before installation and use. Confirm suitability for the specific engine and aircraft installation with applicable maintenance data and qualified personnel.

Contact Us

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.