Phillips 66 Oil Type M Aviation 20W-50 - Case Of 12 Quarts
Part numbers
:
RX1-08-07198
, 1045575
, 08-07198
Unit of Measure:
EA
Overview
| Phillips 66 Type M Aviation Oil is an ashless, nondispersant, multigrade engine oil recommended for use in aircraft piston engines where the operator prefers a mineral oil-based engine oil that does not contain dispersant additives. It provides easier starting and quicker oil circulation at low temperatures compared with single-grade mineral oils, while maintaining high film strength at high temperatures and under high loads for protection against wear and piston scuffing. Type M Aviation Oil is used as break-in oil for newly overhauled engines where all-mineral type oils are recommended. The multigrade formulation helps reduce cylinder glazing tendency during break-in. Break-in normally is accomplished in less than 25 hours of engine operation. |
Features
- Easier starting and quicker oil circulation at low temperatures compared with single-grade oils
- High film strength for protection against wear and piston scuffing, even under high-load conditions, such as takeoff, and at elevated operating temperatures
- Reduces cylinder glazing tendency during break-in, compared with single-grade oils
Specifications
- SAE Standard J1966
- U.S. Military Specification MIL-L-6082 (obsolete)
Applications
- Aircraft piston engines where the operator prefers a nondispersant engine oil
- “Break-in” oil for newly overhauled aircraft engines
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.
These products might also be of interest
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.