Skip to Content
  1. All Products
  2. All Products
  3. Reiff Preheat Rotax 912 & 914
Select currency EUR
Reiff Preheat Rotax 912 & 914

Reiff Preheat Rotax 912 & 914

https://www.roctexo.com/web/image/product.template/125585/image_1920?unique=9a83910
Part numbers : RX1-08-06219 , 912-150 , 08-06219
Unit of Measure: EA

424.88 EUR / EA 424.88 EUR 424.88 € excl. VAT

424.88 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
1 EA ready to ship Tomorrow
Order before 15:30 CET Tomorrow
Up to 3 EA ready to ship on Thursday 2026-08-20
Order before 15:30 CET Tomorrow
3 EA available on request, fees apply
Special order from vendor stock.

The Reiff Preheat 912-150 is an engine-mounted electric preheat system for Rotax 912 and Rotax 914 aircraft engines. Designed to support cold-weather engine preparation, the standard 150 W system applies heat to both the crankcase and oil tank.

  • Manufacturer part number: 912-150
  • Total heating output: 150 W
  • 100 W HotStrip heater bonded to the underside of the crankcase
  • 50 W HotBand heater clamped around the oil tank
  • Oil-tank thermostat designed to limit oil temperature to approximately 88 °C

Installation requires suitable surface preparation and bonding of the HotStrip element. Refer to the manufacturer’s installation instructions and use appropriately qualified maintenance personnel.

Manufacturer installation instructions for Rotax 912/914

Contact Us

Terms and Conditions

Share

Overview

The Reiff preheat system for Rotax 912 and Rotax 914 aircraft engines is an engine-mounted electric preheat system designed for easier cold-weather starts. The preheat system consists of a 100-watt metal "hot strip" element, which is epoxied to the bottom of the crankcase, and a 50-watt band heater that is clamped to the oil tank.
The Reiff is FAA approved, and includes a thermostat to keep the oil from exceeding 150° F.



These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.