Skip to Content
  1. All Products
  2. All Products
  3. Reiff Preheat Rotax 912 & 914
Select currency EUR
Reiff Preheat Rotax 912 & 914

Image for illustration only. It may show a product series rather than the exact product offered.

Reiff Preheat Rotax 912 & 914

Voltage warning
110 V product This unit operates on 110 V and is not intended for use with standard European mains power.
https://www.roctexo.com/web/image/product.template/125585/image_1920?unique=182fd28
Part numbers : RX1-08-06219 , 912-150 , 08-06219
Unit of Measure: EA

438.18 EUR / EA 438.18 EUR 438.18 € excl. VAT

438.18 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
1 EA ready to ship Tomorrow
Order before 15:30 CET Tomorrow
Up to 3 EA ready to ship on Thursday 2026-10-29
Order before 15:30 CET Tomorrow
1 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The Reiff Preheat 912-150 is an engine-mounted electric preheat system for Rotax 912 and Rotax 914 aircraft engines. Designed to support cold-weather engine preparation, the standard 150 W system applies heat to both the crankcase and oil tank.

  • Manufacturer part number: 912-150
  • Total heating output: 150 W
  • 100 W HotStrip heater bonded to the underside of the crankcase
  • 50 W HotBand heater clamped around the oil tank
  • Oil-tank thermostat designed to limit oil temperature to approximately 88 °C

Installation requires suitable surface preparation and bonding of the HotStrip element. Refer to the manufacturer’s installation instructions and use appropriately qualified maintenance personnel.

Manufacturer installation instructions for Rotax 912/914

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

Overview

The Reiff preheat system for Rotax 912 and Rotax 914 aircraft engines is an engine-mounted electric preheat system designed for easier cold-weather starts. The preheat system consists of a 100-watt metal "hot strip" element, which is epoxied to the bottom of the crankcase, and a 50-watt band heater that is clamped to the oil tank.
The Reiff is FAA approved, and includes a thermostat to keep the oil from exceeding 150° F.



These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.