Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

B&C Alternator Case Mount Kit For Other Starter LX-60 with LR3D-14 14V - for Homebuilt

https://www.roctexo.com/web/image/product.template/288251/image_1920?unique=182fd28
Part numbers : RX1-07-27295 , LX60-SC-LR3D-14 , LX60_SC_LR3D-14 , 07-27295
Unit of Measure: EA

1402.55 EUR / EA 1402.55 EUR 1,402.55 € excl. VAT

1402.55 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The B&C LX60-SC-LR3D-14 is a 14 V LX60 alternator system configuration for homebuilt aircraft. It combines the B&C LX60 60 A alternator with a case-mount installation arrangement for use with a non-B&C starter and an LR3D-14 external regulator/controller.

The LX60 is designed with heavy-duty sealed ball bearings, dual internal cooling fans and a precision dynamically balanced rotor. Its externally controlled architecture provides over-voltage protection and low-voltage warning functionality when installed with the appropriate controller/regulator.

  • Manufacturer part number: LX60-SC-LR3D-14
  • Electrical-system configuration: 14 V
  • Alternator output: 60 A
  • Mounting configuration: case mount for non-B&C starter
  • Controller/regulator: B&C LR3D-14
  • Intended for homebuilt/experimental aircraft only; not EASA/FAA approved.

Refer to the B&C LX60 Technical Manual and LX60 Quick Facts documentation for installation, belt selection, mounting and electrical-system requirements. Installation should be performed in accordance with the applicable engine, airframe and electrical-system documentation.

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.