Skip to Content

Image for illustration only. It may show a product series rather than the exact product offered.

Lamar B-00288-1 Reg 14V Par/Op

https://www.roctexo.com/web/image/product.template/118711/image_1920?unique=182fd28
Part numbers : RX1-07-01150 , B-00288-1 , 07-01150
Unit of Measure: EA

605.52 EUR / EA 605.52 EUR 605.52 € excl. VAT

605.52 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 6 EA ready to ship on Monday 2026-10-26
Order before 17:00 CET on Friday 2026-10-23
2 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The Lamar B-00288-1 is a 14 V parallel voltage regulator intended for twin-alternator electrical systems. It provides continuous linear voltage regulation and includes a dedicated parallel connection to support coordinated operation of the regulator system.

Factory set to 14.0 V, the unit has an adjustable voltage range of 13.0 V to 15.0 V and a maximum load current of 4.5 A. Connection functions are identified as BUS, FLD, GND and PAR.

  • Manufacturer part number: B-00288-1
  • Product type: 14 V parallel voltage regulator
  • Duty: Continuous linear
  • Factory voltage setting: 14.0 V
  • Adjustment range: 13.0–15.0 V
  • Maximum load current: 4.5 A
  • Approximate dimensions: 6.7 × 14.3 × 9.5 cm

Installation should be carried out in accordance with the applicable maintenance documentation and approved aircraft technical data. Lamar’s technical data sheet specifies mounting on a metallic airframe member for heat conduction and allowing clearance for air circulation around the regulator.

Documentation: Lamar Technologies 14 V voltage-regulation product information.

Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.