Skip to Content
  1. All Products
  2. All Products
  3. Lamar B-00266-2 Ov Relay 28V
Select currency EUR
Lamar B-00266-2 Ov Relay 28V

Image for illustration only. It may show a product series rather than the exact product offered.

Lamar B-00266-2 Ov Relay 28V

https://www.roctexo.com/web/image/product.template/7104/image_1920?unique=182fd28
Part numbers : RX1-07-01148 , B-00266-2 , 07-01148
Unit of Measure: EA

453.79 EUR / EA 453.7945266935846 EUR 453.79 € excl. VAT

453.79 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The Lamar B-00266-2 is a 28 V over-voltage relay designed for aircraft electrical-system use. It provides one normally closed circuit and is calibrated to operate at 32.0 V ±0.3 V.

  • Manufacturer part number: B-00266-2
  • Referenced alternate part number: 484-182
  • Electrical system: 28 V
  • Contact configuration: one normally closed circuit
  • Contact rating: 10 A, non-inductive
  • Over-voltage action: contacts open and lock open
  • Reset: remove supply voltage
  • Operating time with step voltage: 0.25 seconds at 1.0 V above calibration; 0.09 seconds at 5.0 V above calibration
  • Maximum weight: 0.114 kg
  • Reference dimensions: approximately 37 × 76 × 70 mm (L × W × H)

Manufacturer technical data lists this relay for specified Piper PA-23, PA-31 and PA-36 aircraft, certain Twin Commander models, and the Agusta-Bell AB102. Confirm eligibility, installation configuration and applicable technical data before fitment. The relay case must be positively grounded to the airframe in accordance with the manufacturer’s installation notes.

Unit of measure: each.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.