Skip to Content
  1. All Products
  2. All Products
  3. Tailwheel Leaf Spring Set # 1
Select currency EUR

Image for illustration only. It may show a product series rather than the exact product offered.

Tailwheel Leaf Spring Set # 1

https://www.roctexo.com/web/image/product.template/91930/image_1920?unique=a800d2c
Part numbers : RX1-06-14200 , J3TWSHR , ASS-06-14200 , 06-14200
Unit of Measure: EA

234.67 EUR / EA 234.67 EUR 234.67 € excl. VAT

234.67 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 2 EA ready to ship on Thursday 2026-10-29
Order before 16:00 CET Tomorrow
Up to 3 EA ready to ship on Monday 2026-11-02
Order before 16:00 CET Tomorrow
5 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

Tailwheel Leaf Spring Set #1 is a three-piece steel leaf-spring set for tailwheel landing-gear installations. It is identified by reference part number J3TWSHR.

The set has a nominal spring width of approximately 32 mm, with a 11 mm fuselage-end mounting hole and a 9.5 mm tailwheel-end mounting hole. The distance between bolt centres is approximately 318 mm.

  • Reference part number: J3TWSHR
  • Three leaf springs per set
  • Nominal spring width: approximately 32 mm
  • Fuselage-end hole diameter: approximately 11 mm
  • Tailwheel-end hole diameter: approximately 9.5 mm
  • Distance between bolt centres: approximately 318 mm

The referenced product information identifies original applications including Piper J-3 aircraft from serial number 10339 onward, L-4, PA-11, PA-12, and PA-14 aircraft up to serial number 204. Installation suitability and regulatory status should be confirmed against the specific aircraft records and applicable maintenance data before fitment.

Contact Us
Orders with purchased items below 100.00 € incur a small order fee of 10.00 €. Both amounts exclude VAT. Shipping, other fees and core deposits do not count towards the limit.

Terms and Conditions

Share

Set
No.		Spring
Width
(in.)		Hole
Dia.
Fuselage
End
(in.)		Hole
Dia.
Tail
Wheel
End
(in.)		Distance
Between
Bolt
Centers
(in.)		Orig. App.Wt.
Lbs.		No. of
Springs		PN
11-1/47/163/812-1/2Piper J-3 (serial numbers 10339 and up), L-4, PA-11, PA-12, PA-14 (up to serial number 204)3-1/8306-14200

Overview

FAA/PMA approved subcomponents. Individual for a PA-17 however NOT approved for a PA-15.
(*)= Multiple bends



These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.