Skip to Content
  1. All Products
  2. All Products
  3. McFarlane The Landing Gear Works 14 Tailwheel Assembly XPM1-3-1 FAA-PMA Approved
Select currency EUR
McFarlane The Landing Gear Works 14 Tailwheel Assembly XPM1-3-1 FAA-PMA Approved

McFarlane The Landing Gear Works 14 Tailwheel Assembly XPM1-3-1 FAA-PMA Approved

https://www.roctexo.com/web/image/product.template/287030/image_1920?unique=40bab94
Part numbers : RX1-05-32393 , XPM1-3-1 , 05-32393
Unit of Measure: EA

7003.00 EUR / EA 7003.0 EUR 7,003.00 € excl. VAT

7003.00 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

The Landing Gear Works XPM1-3-1 is a 14 in (approx. 356 mm) tailwheel assembly marketed by McFarlane Aviation. It is configured with a 1 in (25.4 mm) hub size and is supplied as a complete tailwheel assembly.

The manufacturer describes the assembly as providing improved tracking and suitability for operation on uneven paved surfaces, rough fields and conventional runways. The tailwheel fork and hub are manufactured from new aluminium alloys; the manufacturer also states that many internal components are interchangeable with original Scott Aviation parts to support straightforward maintenance.

  • Manufacturer part number: XPM1-3-1
  • Tailwheel size: 14 in (approx. 356 mm)
  • Hub size: 1 in (25.4 mm)
  • Approval status: FAA PMA and FAA PMA STC
  • Manufacturer: The Landing Gear Works / McFarlane Aviation
  • Documented eligibility: Cessna 188, 188A, 188B and A188 aircraft within the manufacturer’s listed serial-number ranges

Please confirm aircraft serial-number eligibility, applicable approval basis and installation data before purchase or installation.

Contact Us

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.