Skip to Content
  1. All Products
  2. All Products
  3. Copper 110 .0201 In Soft Temper 1Lb Spool
Select currency EUR
Copper 110 .0201 In Soft Temper 1Lb Spool

Image for illustration only. It may show a product series rather than the exact product offered.

Copper 110 .0201 In Soft Temper 1Lb Spool

https://www.roctexo.com/web/image/product.template/286954/image_1920?unique=2ce729e
Part numbers : RX1-05-32334 , MCU-0201-1#S , 05-32334
Unit of Measure: EA

39.47 EUR / EA 39.47 EUR 39.47 € excl. VAT

39.47 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 13 EA ready to ship on Monday 2026-10-05
Order before 17:00 CET on Friday 2026-10-02
Up to 14 EA ready to ship on Thursday 2026-10-08
Order before 17:00 CET on Friday 2026-10-02
8 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

Copper 110 soft-temper wire supplied on a 1 lb (0.45 kg) spool. This 24 AWG wire has a nominal diameter of 0.0201 in (0.51 mm) and an approximate spool length of 247 m.

The soft copper construction is generally used as break-away lock wire for securing parts subject to vibration where rapid access or release may be required. It can be broken or sheared with relatively little effort compared with stainless-steel lock wire and other alloys.

  • Material: Copper 110
  • Temper: Soft
  • Nominal wire diameter: 0.51 mm (0.0201 in)
  • Wire size: 24 AWG
  • Spool mass: 0.45 kg (1 lb)
  • Approximate wire length: 247 m (813 ft)
  • Manufacturer part number: MCU-0201-1#S
  • Roctexo part number: RX1-05-32334

Not generally intended for high-temperature applications. Suitability for a specific maintenance task or installation should be confirmed against the applicable approved maintenance data.

Contact Us

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.