Skip to Content
  1. All Products
  2. All Products
  3. CEET-7 Ducting 1 3/4 5Ft
Select currency EUR
CEET-7 Ducting 1 3/4 5Ft

Image for illustration only. It may show a product series rather than the exact product offered.

CEET-7 Ducting 1 3/4 5Ft

https://www.roctexo.com/web/image/product.template/104655/image_1920?unique=fda911f
Part numbers : RX1-05-30507-5 , 05-30507-5
Unit of Measure: EA

73.36 EUR / EA 73.36 EUR 73.36 € excl. VAT

73.36 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 5 EA ready to ship on Monday 2026-09-28
Order before 17:00 CET Tomorrow
Up to 31 EA ready to ship on Thursday 2026-10-01
Order before 17:00 CET Tomorrow
18 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

CEET-7 flexible ducting for conveying air or gaseous fluids in medium-temperature applications. This item is identified as a nominal 44.5 mm internal-diameter, 1.5 m length section.

The ducting is described as Vena MTD-type construction, with two fibreglass textile reinforcements, a black neoprene rubber covering and an embedded steel-wire helix. This combination provides a flexible duct with resistance to ageing for air-routing and ventilation installations where the applicable installation requirements permit its use.

  • CEET-7 designation
  • Nominal internal diameter: 44.5 mm
  • Nominal length: 1.5 m
  • Black neoprene-coated fibreglass construction
  • Embedded steel-wire helix
  • Stated operating temperature range: -55 °C to +125 °C
  • Short-duration temperature capability stated up to +150 °C

Please verify diameter, length, temperature exposure, installation method and applicable technical documentation before use. No EASA/FAA approval status is stated in the supplied product information.

Contact Us

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.