Skip to Content
  1. All Products
  2. All Products
  3. McFarlane Fuel Pump CA62220-004 FAA-PMA Approved
Select currency EUR
McFarlane Fuel Pump CA62220-004 FAA-PMA Approved

Image for illustration only. It may show a product series rather than the exact product offered.

McFarlane Fuel Pump CA62220-004 FAA-PMA Approved

https://www.roctexo.com/web/image/product.template/130064/image_1920?unique=d19d709
Part numbers : RX1-05-28839 , CA62220-004 , 05-28839
Unit of Measure: EA

487.65 EUR / EA 487.65 EUR 487.65 € excl. VAT

487.65 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
2 EA available on request, inbound freight fee of 60 EUR applies
Special order from vendor stock.

The CA62220-004 is a 24 V DC solid-state aircraft fuel pump manufactured by PMA Products and listed with FAA-PMA approval. It is supplied as an individual unit and is intended as a replacement for OEM part number 62220-004, subject to verification of aircraft eligibility and approved maintenance data.

  • Manufacturer part number: CA62220-004
  • Approval: FAA-PMA
  • 24 V system
  • Solid-state pump design
  • Internal check valve to help prevent backflow
  • Designed to re-use the existing aircraft connector during installation
  • Replacement filter kit: CA42370
  • Not approved for use in fuel-injection aircraft
  • Approximate weight: 0.75 kg

The pump is supplied with most factory test fluid removed. During installation, its internal cavities must be flooded with the applicable fluid to prevent air locking and enable correct initial pumping. Installation and eligibility should be confirmed by appropriately qualified personnel using current approved maintenance data and applicable airworthiness requirements.

Manufacturer product information: McFarlane Aviation CA62220-004 Fuel Pump

Contact Us

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.