Skip to Content
  1. All Products
  2. All Products
  3. McFarlane Throttle Control Vernier-Assist MCVAC299505-0501 FAA-PMA Approved
Select currency EUR
McFarlane Throttle Control Vernier-Assist MCVAC299505-0501 FAA-PMA Approved

Image for illustration only. It may show a product series rather than the exact product offered.

McFarlane Throttle Control Vernier-Assist MCVAC299505-0501 FAA-PMA Approved

https://www.roctexo.com/web/image/product.template/104577/image_1920?unique=a73d2bf
Part numbers : RX1-05-26535 , MCVAC299505-0501 , 05-26535
Unit of Measure: EA

1004.06 EUR / EA 1004.06 EUR 1,004.06 € excl. VAT

1004.06 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

MCVAC299505-0501 is a McFarlane Aviation Vernier-Assist™ throttle control assembly. The design combines fine vernier adjustment with conventional push-pull operation: rotate the knob for fine throttle changes, or push and pull the knob for coarse movement.

The Vernier-Assist mechanism operates by friction rather than threaded engagement or locking balls/pins. A friction lock holds the selected position and can be overridden when required. McFarlane describes this patented roller-action design as providing smooth friction control and jam-proof safety without a release button.

  • Manufacturer: McFarlane Aviation
  • Manufacturer part number: MCVAC299505-0501
  • Product type: Throttle control, Vernier-Assist
  • Approval stated by manufacturer: FAA-PMA
  • Unit of measure: Each
  • Approximate weight: 0.45 kg

The manufacturer’s eligibility information lists this control for specified Cessna A185E and A185F aircraft serial-number ranges. Verify the current manufacturer eligibility data, aircraft serial number, installation configuration and applicable approval requirements before installation. EASA approval status is not stated in the available source information.

Contact Us

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.