Skip to Content
  1. All Products
  2. All Products
  3. McFarlane Cessna 180 1956-81 182 58-73 Package D Engine Baffle Kit Bare Black Seals C180182-PKGD-BRBK
Select currency EUR
McFarlane Cessna 180 1956-81 182 58-73 Package D Engine Baffle Kit Bare Black Seals C180182-PKGD-BRBK

Image for illustration only. It may show a product series rather than the exact product offered.

McFarlane Cessna 180 1956-81 182 58-73 Package D Engine Baffle Kit Bare Black Seals C180182-PKGD-BRBK

Factory-direct distributor Roctexo Aerospace is a factory-direct distributor for Cessna, the manufacturer of this product. We welcome requests for any quantity of this product, as well as for other products manufactured by Cessna.
https://www.roctexo.com/web/image/product.template/35054/image_1920?unique=a73d2bf
Part numbers : RX1-05-22591 , C180182-PKGD-BRBK , 05-22591
Unit of Measure: EA

3212.04 EUR / EA 3212.04 EUR 3,212.04 € excl. VAT

3212.04 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

McFarlane Aviation / Airforms Package D engine baffle kit, part number C180182-PKGD-BRBK. This bare-aluminium kit is supplied with black, high-temperature fibreglass-reinforced silicone baffle seals pre-installed.

The kit is listed for applicable Cessna 180 aircraft from 1956 to 1981 and Cessna 182 aircraft from 1958 to 1973. Published eligibility includes Cessna 180 serial numbers 32151 and up, and Cessna 182 serial numbers 34755 through 18262465. Package D selection must be verified against the applicable oil-cooler configuration and manufacturer illustration before installation.

  • Package D complete engine baffle kit
  • Bare 6061-T6 aluminium baffle components
  • Black high-temperature, fibreglass-reinforced silicone seals installed
  • Stainless-steel brackets where required
  • Hard-rivet construction and seal backing plates
  • FAA-PMA approved, as stated by the manufacturer

Mounting hardware, including nuts, bolts, screws, washers, retaining springs and Tinnerman clips, is not included. Where non-standard or aftermarket starter, alternator, exhaust or engine components are installed, adjustment may be required during installation.

Manufacturer part number: C180182-PKGD-BRBK

Documentation: McFarlane Aviation Airforms Complete FAA-PMA Product Line catalogue; refer to the Cessna 180/182 eligibility listing and Package D configuration figure.

Contact Us

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.