Skip to Content
  1. All Products
  2. All Products
  3. McFarlane Cessna 152 1980-82 Engine Baffle Kit Bare Blue Seals C152-8082BRBL
Select currency EUR
McFarlane Cessna 152 1980-82 Engine Baffle Kit Bare Blue Seals C152-8082BRBL

Image for illustration only. It may show a product series rather than the exact product offered.

McFarlane Cessna 152 1980-82 Engine Baffle Kit Bare Blue Seals C152-8082BRBL

Factory-direct distributor Roctexo Aerospace is a factory-direct distributor for Cessna, the manufacturer of this product. We welcome requests for any quantity of this product, as well as for other products manufactured by Cessna.
https://www.roctexo.com/web/image/product.template/72425/image_1920?unique=a73d2bf
Part numbers : RX1-05-22489 , C152-8082BRBL , 05-22489
Unit of Measure: EA

2048.68 EUR / EA 2048.68 EUR 2,048.68 € excl. VAT

2048.68 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Not in stock
Available to order. Lead times vary.

McFarlane complete engine baffle kit, part number C152-8082BRBL, for specified 1980–1982 Cessna 152 aircraft. This configuration is identified as a bare baffle kit with blue high-temperature silicone baffle seals attached.

The kit is intended as a replacement engine-baffling installation for applicable aircraft fitted with the Lycoming O-235-L2C engine. The baffles are manufactured from 6061-T6 aluminium and incorporate design features including hard-rivet construction, stainless-steel brackets where required, and reinforced seal backing plates.

  • Manufacturer part number: C152-8082BRBL
  • Complete engine baffle kit with blue silicone seals
  • FAA-PMA approved product as stated by the supplied product source
  • Applicable serial-number ranges stated by the source: C-152 S/N 15283592 to 15285594; A152 S/N 0879 to 01014; F152 S/N F15201429 to F15201673; FA152 S/N 0358 to 0382
  • Mounting hardware, including nuts, bolts, screws, washers, retaining springs and Tinnerman clips, is not included

Installation should be verified against the aircraft’s existing engine installation and installed components. Where non-standard or differently dimensioned aftermarket components are fitted, adjustment may be required during installation.

Contact Us

Terms and Conditions

Share

These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.