Skip to Content

Cable B Nut Cabin Heat 222-3

https://www.roctexo.com/web/image/product.template/78617/image_1920?unique=2504775
Part numbers : RX1-05-16240 , 93-222-3 , 05-16240
Unit of Measure: EA

11.12 EUR / EA 11.12 EUR 11.12 € excl. VAT

11.12 EUR / EA excl. VAT

Not Available For Sale

This combination does not exist.

Availability
2 EA ready to ship Today
Order before 15:30 CET Today
Up to 13 EA ready to ship on Monday 2026-08-10
Order before 15:30 CET Today
Up to 25 EA ready to ship on Thursday 2026-08-13
Order before 15:30 CET Today
33 EA available on request, fees apply
Special order from vendor stock.

The Cable B Nut Cabin Heat 222-3 is a stainless-steel cable-end assembly identified for cabin-heat control cable use. It is designed to secure a push-pull control cable through a machined channel using a compression screw, helping avoid crushing or crimping the cable end during installation.

  • Manufacturer part number: 93-222-3
  • Roctexo part number: RX1-05-16240
  • Stainless-steel, machined construction
  • Machined cable channel with compression-screw retention
  • Supplied with washers and cotter pin
  • Unit of measure: each

A practical cable-end fitting for maintenance, replacement, and aircraft-building applications where the specified 93-222-3 configuration is required.

ABCDPN
.070.645.249.09305-16240

Overview

This universal NAP assembly will eliminate bent or smashed push-pull cable ends and get a strong hold at the same time. The cable end lays in a machined channel at the bottom of the screw hole. Tightening the compression screw snugs down on the cable end thus eliminating any potential crimping or smashing of the cable. Eliminates wear, possible cable breakage and enhances smooth push-pull operation. Complete with washers and cotter pin. All stainless steel, computer machined and easy to install.

Reference Chart


These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.