Skip to Content
  1. All Products
  2. All Products
  3. Protect-Fast Expandable Wrap PFA-PFW-1-Bt
Select currency EUR
Protect-Fast Expandable Wrap PFA-PFW-1-Bt

Protect-Fast Expandable Wrap PFA-PFW-1-Bt

https://www.roctexo.com/web/image/product.template/11734/image_1920?unique=e5f6e6c
Part numbers : RX1-05-12893 , PFA-PFW-1-BT-200 , 05-12893
Unit of Measure: FT

1.27 EUR / FT 1.27 EUR 1.27 € excl. VAT

1.27 EUR / FT excl. VAT

Not Available For Sale

This combination does not exist.

Availability
Up to 71 FT ready to ship on Monday 2026-08-17
Order before 17:00 CET Tomorrow
332 FT available on request, fees apply
Special order from vendor stock.

Protect-Fast PFA-PFW-1-BT-200 is a braided expandable wrap designed to contain and help protect wire bundles, cable assemblies and hoses from abrasion and cutting. Its slip-over, split-wrap construction supports installation along an existing cable or harness run.

  • Manufacturer part number: PFA-PFW-1-BT-200
  • Nominal wrap size: 1/4 in (approximately 6 mm)
  • Nominal bulk-roll length: 200 ft (approximately 61 m)
  • Unit of measure: foot
  • Published operating temperature range: -75 °C to +125 °C
  • Published as solvent resistant and self-extinguishing
  • Published flammability references: UL VW-1 and FAR 25
  • Published wrap overlap: 25%

A lightweight cable-management solution for maintenance, retrofit and harness-protection tasks where a braided protective wrap is required. Verify the required size, material suitability and installation requirements against the applicable aircraft or equipment documentation before use.

Contact Us

Terms and Conditions

Share

DescriptionNominal
(Inch)		Feet
(Per Roll)		PN
Braided Expandable Wrap - Bulk1/420005-12893

Overview

Protect-Fast™ AERO Braided PFA-PFW Sleeving is an efficient ‘slip-over’ solution allowing for easy installation of wires or bundles of cables’ entire run . Flame spread is a vital safety consideration in applications such as home built aircraft wiring and or retrofitting new avionics. Self-extinguishing Protect-Fast PFA-PFW material is FAR25 approved, fully complies with UL standard VW-1. The addition of an organic flame inhibitor to our triaxially braided PFW split sleeving provides the perfect solution to a wide range of cable management needs.

Protect-Fast is a tough, lightweight method used to contain and protect cable assemblies, hoses and wire harnesses from abrasion and cutting. Solvent resistant with a temperature rating from -75ºC to 125ºC (-103ºF to 257ºF).

Provides 150% Expansion Sleeve with 25% Overlap Wrap.



These products might also be of interest

Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.